Home

Hydroponics

View Shopping Cart

Contact Us

Search

Control Wizard
Convertible Horizontal Reflectors

Great reflectors!  Will not burn out light movers like heavy metal reflectors can.

Control Wizard Products has manufactured the first truly convertible lamp reflector. Control Wizard Products' lightweight Convertible Reflector ^TM will not burn out light movers like heavy steel reflectors do. Lightweight high quality painted aluminum is used to help insure that all brands and models of light movers will give years of faithful service. The reflector can be air cooled with either 4-inch or 6-inch air ducting by simply removing the appropriate end plates and install the selected air duct adapters. One or two air ducts may be run through the reflector at any one time. There is no right or wrong way to use the air ducting adapters or position lamps. The reflector has been designed to work for all applications. Use your imagination. The basic reflector does not include ducting adapters. Once you determine your needs you may order ducting adapters. Ten bends in the reflector insure the grower that any brand of HID lamp will throw an even light pattern over the plants. Multiple lamps may be used in several different configurations. Purchase an extra lamp socket plate and horizontal socket assembly when adding another lamp. No screwdrivers are required to position air ducting adapters, louvered plates, socket assembly plates or block-out plates. A screwdriver is needed to remove or replace the glass retainer lock. Glass is not included unless it is ordered. The Tempered Glass Shield is needed for air-cooling or to reduce UV rays to cuttings. Also, the Tempered Glass Shield is highly recommended, as it will protect the consumer from burns caused by accidentally coming in contact with the hot lamp or spraying water on a hot lamp, causing it to implode. High wattage compact fluorescent mogul base lamps may be used if a 120-volt socket assembly and power cord is purchased for each lamp. Control Wizard Products recommends Sunmaster brand lamps for the best growing results.

Before you install a Position Oriented Horizontal Metal Halide lamp (designed to burn in the horizontal position only) into your new Convertible reflector you must connect a horizontal positioned socket assembly to the hood. You can purchase one from Control Wizard Products to replace your old one, ask to have one included with your new reflector or ask to have one installed on your new lamp ballast. High Pressure Sodium lamps do not require a Position Oriented Socket however this manual will treat all HID lamps the same. Convertible reflectors outfitted with a glass shield will have to remove the glass shield to install the ceramic mogul socket and lamp. To do this you will need to detach the glass shield retainer from the reflector by removing its four screws and slide the glass shield carefully out of the reflector. As with all horizontal HID lamp reflectors this reflector requires a horizontal positioned socket assembly to burn Metal Halide lamps properly. The ceramic mogul socket has a notch in the ceramic base and a lamp pin catch. When installing the mogul socket onto the reflector this notch must be at the 6 o'clock position when looking up into the reflector. This will allow all Horizontal burning Metal Halide lamps to burn properly and meet manufacturers warranty requirements. Screw the lamp into the socket clockwise until is stops turning. Carefully slide the glass shield back into the reflector and re-attach the glass shield retainer. Hang the reflector from the supplied eyebolts.

Lights & Accessories        Reflectors

Control Wizard Horizontal Reflectors    Great Light Distribution without Hot Spots. Comes with removable louvered vent plates and socket hole.  Run multiple air outlets and/or lamps. Configure to meet your needs.  It will also accept the fan tube adapters for air cooling. Optional adapters include: 4" air adapter(RE004), 6" air adapter(RE005), socket plate(RE001). Sold Separately.
Control Wizard Large Convertible Horizontal Reflectors, plates and air adapters Reflector dimensions are 24.25" x 24.25" x 10.5"
	Large Convertible Reflector Comes with 1 socket plate, 2 louvered plates, and 3 blockout plates. No Socket Assembly included. Reflector dimensions are 24.25" x 24.25" x 10.5".	RE010 $94.95 Add to Cart
	Large Convertible Reflector with Tempered Glass Comes with 1 socket plate, 2 louvered plates, 3 blockout plates and Tempered Glass. No Socket Assembly included. Reflector dimensions are 24.25" x 24.25" x 10.5".	RE011 $114.95 Add to Cart
	Large Convertible Reflector with Glass and 4 Inch Air Adapters Comes with 1 socket plate, 2 - 4" air adapters, 3 blockout plates and Tempered Glass. No Socket Assembly included Reflector dimensions are 24.25" x 24.25" x 10.5".	RE012 $132.95 Add to Cart
	Large Convertible Reflector with Glass and 6 Inch Air Adapters Comes with 1 socket plate, 2 - 6" air adapters, 3 blockout plates and Tempered Glass. No Socket Assembly included Reflector dimensions are 24.25" x 24.25" x 10.5".	RE013 $139.95 Add to Cart
	Large Convertible Reflector Tempered Glass 23 13/16" x 23 13/16" x 1/8"	RE006 $29.95 Add to Cart
	Large Convertible Reflector Socket Plate Use this plate along with a socket assembly to add lamps to the Convertible Reflector	RE001 $4.95 Add to Cart
	Large Convertible Reflector Block Out Plate Use a BlockOut Plate cover open holes in the Convertible Reflector	RE002 $4.95 Add to Cart
	Large Convertible Reflector Louvered Plate Use the Louvered Plate to allow for air to flow through the reflector	RE003 $4.95 Add to Cart
	Large Convertible Reflector 4 Inch Air Adapter Use this 4" adapter to attach 4" ducting for air cooling the Convertible Reflector	RE004 $9.95 Add to Cart
	Large Convertible Reflector 6 Inch Air Adapter Attach 6" ducting to these adapters to cool Control Wizard Products' Convertible Reflector	RE005 $9.95 Add to Cart
Control Wizard Small Convertible Horizontal Reflectors, plates and air adapters Reflector dimensions are 17" x 17.5" x 7"
	Small Convertible Reflector Comes with 1 socket plate, 2 louvered plates, and 3 blockout plates. No Socket Assembly included Reflector dimensions are 17" x 17.5" x 7"	RE500 $84.95 Add to Cart
	Small Convertible Reflector with Glass Comes with 1 socket plate, 2 louvered plates, 3 blockout plates and a glass shield. No Socket Assembly included. Reflector dimensions are 17" x 17.5" x 7"	RE501 $94.95 Add to Cart
	Small Convertible Reflector with Glass and 4" Air Adapters Comes with 1 socket plate, 2 4" air adapters, 3 blockout plates and a glass shield. No Socket Assembly included Reflector dimensions are 17" x 17.5" x 7"	RE502 $104.95 Add to Cart
	Tempered Glass for Small Convertible Reflector 17.25" x 16.875" x 1/8"	RE504 $14.95 Add to Cart
	Socket Plate for Small Convertible Reflector Use this plate along with a socket assembly to add lamps to the Small Convertible Reflector	RE505 $4.50 Add to Cart
	Small Convertible Reflector 4" air adapter Use this 4" adapter to attach 4" ducting for air cooling the Small Convertible Reflector	RE503 $8.95 Add to Cart
	Small Convertible Reflector Block Out Plate Use a BlockOut Plate cover open holes in the Small Convertible Reflector	RE507 $4.50 Add to Cart
	Small Convertible Reflector Louvered Plate Use the Louvered Plate to allow for air to flow through the Small Convertible Reflector	RE506 $4.50 Add to Cart
	Eye Bolt 1/4" Balancing Eye Bolt for Control Wizard Products' Convertible Reflector	EL258 $1.00 Add to Cart

Gift Certificates are available for all products. Gift Certificates will be mailed to you or to the recipient of your choice.  They are redeemable by email order or telephone order. (505) 217-1725
Gift Certificates	$25.00	$50.00	$75.00	$100.00